AudioControl

AudioControl The Epicenter 1200 1200W 1CH High-Power Subwoofer Amplifier

Highlights in der Übersicht

  • Rated Continuous (RMS) Power at 14.4V
    • 1x 1200W (1Ω)
    • 1x 750W (2Ω)
    • 1x 400W (4Ω)
  • High Current Design – 1 Ohm Stable
  • THE EPICENTER® Digital Bass Restoration
  • MILC™ Maximum Input Level Control (Patent Pending)
  • 24 dB/octave Linkwitz-Riley Alignment Crossover
  • GTO Signal Sense
  • PFM Subsonic Filter
  • Line-Level RCA Inputs and Active Speaker-Level Inputs
  • Solid One-Piece Aluminum Chassis
  • Remote Control for Subwoofer Level and THE EPICENTER® effect
  • Expansion Bus
Lieferzeit 1-4 Tage

Regulärer Preis: 799,00 €

Special Price 649,00 €

Inkl. 19% MwSt., zzgl. Versandkosten Versandkostenfrei innerhalb Dtl.
Artikelnummer: A18075

Details

AudioControl The Epicenter 1200 1200W 1CH High-Power Subwoofer Amplifier

When car audio systems demand high levels of subwoofer power output into difficult loads, and a wide range of adjustment to optimize the subwoofer performance within the system, the AudioControl EPICENTER® 1200 power amplifiers are the ideal solutions. Each model delivers high current, stable down to 1 Ohm, and each has a removable top cover that allows access to controls for THE EPICENTER® effect, crossover frequency, gain, polarity, subsonic filter, signal sense and expansion bus mode.

Simply the most advanced subwoofer amplifiers in car audio today

The Epicenter® 1200 amplifiers incorporate our patented bass restoration processor to deliver earth-shaking power to your subwoofer system. Carefully applied signal processing at just the right spot, enhances the listening experience and maximizes your bass quality. In a real-world listening environment, we invite you to compare this amplifier to any other amplifier in the same power category, at any price, and you will quickly learn that the Epicenter amplifiers will always have more bass! It’s time to hear what you have been missing.

The Epicenter amplifier is not a cold heartless box for increasing the loudness of bass frequencies in your system. It restores the bass frequencies to how they were meant to be. It is a bass-frequency re-enactor. Your favorite music will come alive and breath, and live again, and you will hear its presence like you haven’t heard it before. That’s how good it is. AudioControl’s engineering department designed these amplifiers from the ground up. They feature a black brushed aluminum finish, with black powder-coated cast alloy heat sinks and bottom panel in one single piece. A black-brushed aluminum cover is also provided to protect the controls from the prying hands of carnival clown folk who have wronged you.

Here are some of the features that make the Epicenter 1200 amplifiers very unique and unlike any other amplifiers:

Alle Features im Überblick

  • Superior Sound Quality

    Pristine sonics happens first in all AudioControl designs and is not compromised by any other feature. (You often get the feeling that sound quality is an afterthought with products from other companies.)

  • High Power Levels

    The high-efficiency Class D monoblock subwoofer amplifier is a high-current design, capable of driving subwoofer loads down to 1 Ohm impedance. The output power of the Epicenter 1200 is 1200 Watts into 1 Ohm.

  • The Epicenter Bass Restoration

    Whether from the point of view of reducing current draw, or from the viewpoint of less heat in the trunk, the Epicenter 1200 subwoofer amplifiers have no equal. They are VERY energy efficient during operation.

  • MILC™ Maximum Input Level Control

    The Epicenter amplifier analyses the incoming audio signals and detects any signal clipping. This gives you the chance to optimize the audio signal levels going in to the Epicenter amplifier.

  • GTO Signal Sense

    the Epicenter amplifier will turn on gracefully when it detects an incoming audio signal, and it will turn off after a period of time when the audio signal fades away to silence. In some situations, factory installed audio systems may turn on or “wake up” due to convenience features like door chimes, alarms, and cell phone signals that trigger the source unit in the vehicle to come on.

  • PFM Subsonic

    Many car audio systems truly push the limits of their subwoofer without really knowing it. Tuned enclosures affect the roll-off of many speakers, and yet lots of source material forces the speakers to play lower than is good for them. The net result is wasted amplifier power and damaged speakers. The AudioControl PFM filter is a programmable subsonic filter that allows the speaker to play only as low as it should be playing. Because every system is different, we allow you to select the PFM frequency (either 32 Hz or 16 Hz).

  • Self Resetting Protection Features

    Protection features are extensive and include thermal, short circuit, clipping, under voltage, over voltage, and DC offset among others. If the fault is removed, the unit may reset. The protection LED flashes with various codes that indicate the fault detected.

  • ACR-3 Wired Remote

    This dash-mounted remote allows easy adjustment of the output level, and the level of the Epicenter bass restoration.

  • Pacific Northwest Heritage

    The engineers who designed this amplifier are native Northwesterners, steeped and learned in the long and impressive audio engineering history of Washington State, and all able to reach their catch limit during razor-clam digging season. We are very proud of that fact. What is more important is the care we craft in at every step, and the extensive knowledge we have in all aspects of the product. Plus, we back this up with a conditional five year warranty.

Produkt-Videos

Zusatzinformation

Technische Daten

Inputs

  • Preamp Inputs: 1 Main, 1 Expansion Bus
  • Input Voltage Range: 200 mV – 6 V RMS

Outputs

  • Rated Continuous (RMS) Power at 14.4V:
    • 4 Ω – 400 W x 1 RMS
    • 2 Ω – 750 W x 1 RMS
    • 1 Ω – 1200 W x 1 RMS
  • Expansion Bus Output: Buffered, post-processing

Performance

  • Frequency Response: 16 Hz – 250 Hz
  • Signal to Noise: 107 dBa, Ref 1200 W at 1 Ohm
  • Damping Factor: 770 at 10 V, 4 Ohm Output, 100 Hz
  • THD+N: < 0.1%
  • Bass Processing: The Epicenter®
  • Minimum Power / Ground Wire Gauge: 0 AWG wire
  • Fuse Rating: 3 x 40 A
  • Low-Pass Filter: 24dB/Octave Linkwitz-Riley, Adjustable From 30 Hz – 250 Hz
  • PFM Subsonic Filter: 18dB/Octave, Selectable 16 Hz or 32 Hz
  • Output Polarity Switch: Yes

Weights & Dimensions

  • Dimensions: 30,5 x 20,2 x 5,3 cm
  • Weight: 3,0kg
Lieferumfang
  • AudioControl The Epicenter 1200
  • Speaker Connectors
  • ACR-3 Remote Control
  • Fuses
Hersteller AudioControl
EAN 4047442070266


Kompatibilität

Zu diesem Artikel sind keine Fahrzeug-Kompatibilitäten hinterlegt.


Kundenmeinungen

Schreiben Sie Ihre eigene Kundenmeinung:

Nur registrierte Kunden können Bewertungen abgeben. Bitte melden Sie sich an oder registrieren Sie sich

Direkter Kontakt
maxxcount.de GmbH & Co. KG
Gostritzer Straße 61-63
01217 Dresden
Deutschland

Tel. +49 (0)351 / 871 82 22
Fax +49 (0)351 / 871 82 36

Sie erreichen uns telefonisch:
Mo.-Do.: 9-12 / 13-16 Uhr
Fr.: 9-12 Uhr
* Gilt für Lieferungen nach Deutschland. Lieferzeiten für andere Länder und Informationen zur Berechnung des Liefertermins siehe hier: zur Versandinfoseite.
** Ehemaliger Verkäuferpreis inkl. MwSt. zzgl. Versandkosten