AudioControl LC-6.1200 1200W High-Power 6CH Amplifier with AccuBASS®

Highlights in der Übersicht

  • Configurable as 6/5/4/3/2 channel amplifier
  • Continous Power all Channels Driven (RMS) at 14.4V
    • 6x 125W (4Ω)
    • 6x 200W (2Ω)
    • 3x 400W Bridged (4Ω)
  • AccuBASS® Processing
  • MILC™ Maximum Input Level Control (Patent Pending)
  • GTO™ Signal Sense
  • 3-way Independent Linkwitz-Riley Alignment crossovers
  • Summable active speaker-level inputs (8 channels) for OEM integration
  • 6 preamp inputs
  • 2 assignable preamp outputs
  • PFM Subsonic Filter
  • Optional ACR-1 assignable remote control
  • Solid One-Piece Aluminum Chassis
Lieferzeit 1-4 Tage

Regulärer Preis: 749,00 €

Special Price 699,00 €

Inkl. 19% MwSt., zzgl. Versandkosten Versandkostenfrei innerhalb Dtl.
Artikelnummer: A18077


AudioControl LC-6.1200 1200W High-Power 6CH Amplifier with AccuBASS®

Building from the hugely successful LC-4.800 multi-channel amplifier, the LC-6.1200 is surely the most flexible 6 channel amplifier on the market. Featuring eight active speaker level inputs with summing, coupled with an intuitive three-way Linkwitz-Riley crossover network, the LC-6.1200 can be easily integrated with most factory installed source units. The patented AccuBASS® circuit compensates for factory bass roll-off and provides maximum bass performance.

More control and features include our GTO Signal Sense, MILC Source Clip Detection and assignable Remote Level Control. The LC-6.1200 builds on the legacy of audio passion and a focus on user-friendly features, making this a perfect solution based amplifier.

Alle Features im Überblick

  • GTO Signal Sense

    Many cars can turn on the factory amplifier even if the source unit is off (Alarms, Cell phones, etc). To prevent this from turning your system on unexpectedly, you can bypass the GTO™ circuit by moving the GTO™ jumper, and using an applied 12-volts at the Remote In terminal. Using the jumper may result in some factory features not working fully.

  • AccuBASS® Processing

    Factory installed amplifiers and woofers are (unfortunately) not designed to reproduce bass at high volumes. Car manufacturers adapt to this by taking the bass out of the signal when you turn up the volume. AudioControl developed the patent pending AccuBASS™ circuit to restore bass. After a quick and easy one-time setting, the AccuBASS™ circuit takes over the bass just as the factory system rolls off. You get smooth, seamless, and rock solid bass response regardless of volume level.

  • MILC™ Source Clip LED

    The MILC™ (Maximum Input Level Control) patent-pending level-setting circuit prevents clipping and damaging distortion. It calculates when the waveform of an incoming audio signal on input 1 and 2 is clipping, and if it is, this LED will fulfill its prime objective and shine forth. With this advanced feature, you are able to optimize the level of the incoming audio signals until the Source Clip LED is just-prior to lighting. If the LED comes on during normal operation, you should adjust the level of the audio signals before they reach the LC-6.1200.

  • Remote Level Control ACR-1 (Optional)

    The AudioControl ACR-1 dash control is a remote level for your LC-6.1200 amplifier. It may be mounted under the dash using its own enclosure, or through a custom hole in the dash. The knob should be within reach of the driver, and in a spot where the LED is plainly visible. Disconnect the vehicle battery +12V and Ground connections before installation.



Technische Daten


  • Preamp Inputs: 6 balanced
  • Preamp Input Voltage Range: 250 mV – 8 V RMS
  • Speaker Level Inputs: 8


  • Rated Continuous (RMS) Power at 14.4V:
    • 4 Ω – 125W x 6 RMS
    • 2 Ω – 200W x 6 RMS
    • Bridged 4Ω – 400W RMS
  • Preamp Outputs: 2
  • Maximum Preamp Output: 8.5 V RMS


  • Frequency Response: 10 Hz – 30 kHz
  • Signal to Noise: 102 dBa, Ref 200 W @ 2 Ohm
  • THD+N: < 0.1%
  • Minimum Power / Ground Wire Gauge: 3 AWG wire
  • Fuse Rating: 3 x 40 A
  • Crossover: 3-way Linkwitz-Riley, Adjustable From 30 Hz – 5000 Hz

Weights & Dimensions

  • Dimensions: 30,5 x 20,3 x 5,3 cm
  • Weight: 3,3Kg
  • AudioControl LC-6.1200
  • Speaker Connectors
  • Fuses
Hersteller AudioControl
Produkttyp Verstärker
EAN 4047442070280

Downloads & Testberichte


Zu diesem Artikel sind keine Fahrzeug-Kompatibilitäten hinterlegt.


Schreiben Sie Ihre eigene Kundenmeinung:

Nur registrierte Kunden können Bewertungen abgeben. Bitte melden Sie sich an oder registrieren Sie sich

Direkter Kontakt GmbH & Co. KG
Gostritzer Straße 61-63
01217 Dresden

Tel. +49 (0)351 / 871 82 22
Fax +49 (0)351 / 871 82 36

Sie erreichen uns telefonisch:
Mo.-Do.: 9-12 / 13-16 Uhr
Fr.: 9-12 Uhr
* Gilt für Lieferungen nach Deutschland. Lieferzeiten für andere Länder und Informationen zur Berechnung des Liefertermins siehe hier: zur Versandinfoseite.
** Ehemaliger Verkäuferpreis inkl. MwSt. zzgl. Versandkosten