AudioControl DM-810 Premium 8 input by 10 output DSP Matrix Processor

Highlights in der Übersicht

  • Input and Output RTA for precise and informed tuning
  • MILCTM Clip Detection / Level Matching
  • AccuBASS® Processing
  • GTOTM Signal Sensing
  • Smart User Interface (DM Smart DSP App) software included
  • Active Speaker-Level-Inputs
  • Signal Summing
  • Signal Delay
  • 30 Band Equalizer
  • Real Time Analyzer
  • Configurable 12 / 24 dB/octave Linkwitz-Riley Crossovers
  • Always up to date thanks firmware updates
  • Optional ACR-3 remote for preset recall and level control
  • Optional Bluetooth Interface
Lieferzeit 1-4 Tage
699,00 €
Inkl. 19% MwSt., zzgl. Versandkosten Versandkostenfrei innerhalb Dtl.
Artikelnummer: A18073


AudioControl DM-810 Premium 8 input by 10 output DSP Matrix Processor

When you require total control and optimization to achieve great sound quality, AudioControl’s DM-810 Processor is the solution.

The powerful DM-810 processor allows users to truly optimize the performance of their audio system, regardless of whether they are using a factory or aftermarket source, and to truly achieve the goal of “Making Good Sound Great”.

These highly versatile Digital Signal processors are equipped with key features, such as active speaker level inputs, line-level and digital audio inputs, providing up to 10 channels of output. AudioControl’s “smart user” interface contains the power of AudioControl processing through a flexible PC interface packed full of features in a simple lay out. Configure signal summing, 30 bands of equalization, signal time-alignment, input delay and phase correction, plus AudioControl proprietary features like AccuBASS®, GTOTM Signal Sense, and MILCTM as well as integrated input and output RTA’s.

The built in Option Port on the DM-810 is the future of car audio and will allow hi-res streaming directly into the DSP. It also opens up future proprietary connections for additional inputs, controllers and interface solutions. 

Designed to be the ultimate in sound quality and enhanced audio performance, the DM-810 is our latest AudioControl processor that sets a new standard for sound and what can be achieved in car audio systems.

Alle Features im Überblick

  • MILCTM (Maximum Input Level Control)

    The DM-810 features AudioControls MILCTM (Maximum Input Level Control) patent-pending source clip detection circuit. TM calculates when the waveform of an incoming audio signal is clipping, and if it is, the LED will fulfill its prime objective and shine forth, aiding in precise level matching control.

  • AccuBASS®

    This is AudioControl’s patented bass restoration for factory head units.

  • GTOTM circuit ("Great Turn On")

    The GTO or “Great Turn On” circuit automatically turns the unit on whenever it senses a signal on the channel 1 audio input. It enables the user to not have to run a remote trigger to the unit to turn the system on. You can still use the remote out on the unit when using the GTO.

  • Options Port

    The built in Option Port on the DM-810 is the future of car audio and will allow hi-res streaming directly into the DSP. It also opens up future proprietary connections for additional inputs, controllers and interface solutions. Watch this space for future Option Port expansion options. For Example connect our new optional Bluetooth adapter, so you can stream audio into channels 7 and 8 from your Bluetooth-enabled devices. Further details will be available when this accessory and others become available.

  • DM Smart DSP App

    Connect your laptop to the DM-810 using AudioControl’s DM Smart DSP app, a fully featured Matrix DSP Interface designed to give you instant and clear control over every aspect of your processor. Route any input to any output, adjust gain, delay and polarity then precisely tune the DM-810 using a 30 band EQ. High-pass, low-pass and band-pass can be set up for any output using 12 or 24 dB/octave Linkwitz-Riley crossovers. For OEM integration, take advantage of the input and output RTAs, available for every input and output, to easily identify and sum factory speaker signals.With a clear GUI and intuitive workflow, AudioControl’s Smart User Interface will take the guesswork out of tuning your system to your exact specifications.

  • Speaker-Level Inputs

    The speaker-level output from amplifiers and factory installed radios can connect here, so the DM-810 will receive the audio signals this way and do its thing. Make sure that you follow the plus and minus polarity markings on the DM-810 and match it to the polarity of the speaker wiring. Analog signal entering the DM-810 are the sum of the speaker-level inputs and the respective RCA Line-level inputs.

  • RCA Analog Line-Level Inputs

    The line-level output from the head unit or factory-installed radios can connect here, so the DM-810 will receive the line-level audio signals. The inputs are 1-2 (stereo), 3-4 (stereo), 5 (mono), 6 (mono), and 7-8 (stereo). Note that inputs 7 and 8 will default to the digital inputs (3) if there is a digital input signal present. Inputs 1-2 have the GTO™ (great turn on) signal-sense circuit that will awaken the DM-810 when an analog input signal is present.

  • Coaxial and Optical Digital Inputs

    These S/PDIF and Toslink inputs allow you to connect the digital audio output from source units. These inputs share the use of inputs 7 and 8 as follows: If a digital signal is present, then input channels 7 and 8 receive the audio from the digital source. If there is no digital signal present, then inputs 7 and 8 are the sum of the speaker-level inputs 7 and 8, analog line-inputs 7 and 8, and any streaming audio coming in via Bluetooth connection on the Option Port.

  • RCA Analog Line-Level Outputs

    These line-level analog outputs from the DM-810 connect to the line-level inputs of your power amplifiers and other equipment. The matrix capabilities of the DM-810 allow you to pick and choose the outputs from any combination of inputs, add crossovers and EQ as required.

  • Remote Power Input Terminal

    The Remote Power Input connects to the 12V remote trigger output of some head units. When the head unit is turned on, then the DM-810 will turn on. Alternatively, you can use the GTO feature of the DM-810 so it will turn on when an audio signal is detected at the speaker-level or line-level inputs of channels 1-2.

  • Remote Power Output Terminal

    The Remote Power Output connects to the 12V remote trigger input of other units and amplifiers down the line. When the head unit is turned on, then the DM-810 will turn on and this daisy-chain connection will allow other units in your system to turn on.

  • LED Indicators

    These LEDs illuminate when a maximum audio signal is present on any of the analog audio inputs / outputs.

  • USB Micro Connector

    This connects to the USB A port of your computer in order to use the control software to configure the DM-810.

  • Optional Remote Control

    This connects to the optional ACR-3 remote level control using a standard telephone cord and connectors.



Technische Daten


  • Preamp Input Channels: 8
  • Digital Inputs: 1 x Toslink and Coax
  • Input Impedance Preamp / Speaker-level: 20 kΩ / 7 kΩ


  • Preamp Outputs Channels: 10
  • Maximum Output Level: 10 Vrms
  • Output Impedance: 150 Ω


  • Total Harmonic Distortion: 0.01%
  • Frequency Response: 20 Hz to 24 kHz
  • Crossover Frequency: variable
  • Crossover Type: 12 and 24 dB/octave Linkwitz-Riley


  • 12 VDC Remote In
  • 12 VDC Remote Out (always active when unit is on)


  • Power Supply: High Headroom PWM Switching
  • Current Draw: 1A
  • Recommended Fuse Rating: 3A

Weights & Dimensions

  • Dimensions: 26,7 x 14,5 x 4,1 cm
  • Weight: 1,2kg
  • AudioControl DM-810
  • Power and Speaker Connectors
Hersteller AudioControl
Produkttyp Digitaler Sound Prozessor (DSP)
EAN 4047442070242

Downloads & Testberichte


Zu diesem Artikel sind keine Fahrzeug-Kompatibilitäten hinterlegt.


Schreiben Sie Ihre eigene Kundenmeinung:

Nur registrierte Kunden können Bewertungen abgeben. Bitte melden Sie sich an oder registrieren Sie sich

Direkter Kontakt GmbH & Co. KG
Gostritzer Straße 61-63
01217 Dresden

Tel. +49 (0)351 / 871 82 22
Fax +49 (0)351 / 871 82 36

Sie erreichen uns telefonisch:
Mo.-Do.: 9-12 / 13-16 Uhr
Fr.: 9-12 Uhr
* Gilt für Lieferungen nach Deutschland. Lieferzeiten für andere Länder und Informationen zur Berechnung des Liefertermins siehe hier: zur Versandinfoseite.
** Ehemaliger Verkäuferpreis inkl. MwSt. zzgl. Versandkosten