AudioControl D-4.800 800W High-Power Matrix 4CH DSP Amplifier

Highlights in der Übersicht

  • Configurable as 4/3/2 channel amplifier with DSP Processing
  • Continous Power all Channels Driven (RMS) at 14.4V
    • 4x 125W (4Ω)
    • 4x 200W (2Ω)
    • 2x 400W Bridged (4Ω)
  • AccuBASS® Processing
  • MILC™ Maximum Input Level Control (Patent Pending)
  • GTO™ Signal Sense
  • Independent 24dB/octave Linkwitz-Riley Crossovers
  • Summable active speaker-level inputs (6 channels) for OEM integration
  • 4 preamp inputs & 2 assignable preamp outputs
  • Optional ACR-3 assignable remote control
Lieferzeit 1-4 Tage
899,00 €
Inkl. 19% MwSt., zzgl. Versandkosten Versandkostenfrei innerhalb Dtl.
Artikelnummer: A18078


AudioControl D-4.800 800W High-Power Matrix 4CH DSP Amplifier

Amplifier and DSP in one package

Two keys to unlocking great sound in a car stereo system are serious power and extensive control — and this amp's got them both. For power, AudioControl's D-4.800 4-channel amplifier generates 125 watts RMS per channel, so it'll drive even the most demanding aftermarket speakers with plenty of headroom to spare. You could also bridge the D-4.800 to drive a couple subwoofers with 400 watts RMS each.

Computer-controlled digital signal processing

You won't find any knobs on the D-4.800 — you make adjustments and save settings via your PC, Android, or iOS device. AudioControl's Smart-User DSP software package includes 24 dB/octave Linkwitz-Riley crossovers, 30-band equalizers, parametric filters, time delay/alignment for inputs and outputs, phase correction, AccuBass™ bass correction, and real-time analyzers (RTA) for the inputs and outputs so you can visually confirm the improvements in the sound.

It's made to work with a factory radio

Six active speaker-level inputs allow you to connect this amp to almost any factory system, even ones that have separate pre-filtered, time-aligned, and amplified signals going to separate factory speakers and tweeters. The D-4.800 sums them into one smooth, unified signal for you to balance, align, and tune for your better-sounding aftermarket speakers. AudioControl's Great Turn On (GTO™) signal-sensing circuitry turns the amp on automatically whenever it senses an input, so you won't have to run a separate turn-on lead back to the receiver.

Convenient features

Onboard LEDs indicate optimized signal flow for inputs and outputs, plus give you a warning when a source is too loud and causing distortion. An optional ACR-3 wired remote controller lets you select sources, control levels, and recall presets from your front seat.

Alle Features im Überblick

  • GTO Signal Sense

    Many cars can turn on the factory amplifier even if the source unit is off (Alarms, Cell phones, etc). To prevent this from turning your system on unexpectedly, you can bypass the GTO™ circuit by moving the GTO™ jumper, and using an applied 12-volts at the Remote In terminal. Using the jumper may result in some factory features not working fully.

  • AccuBASS® Processing

    Factory installed amplifiers and woofers are (unfortunately) not designed to reproduce bass at high volumes. Car manufacturers adapt to this by taking the bass out of the signal when you turn up the volume. AudioControl developed the patent pending AccuBASS™ circuit to restore bass. After a quick and easy one-time setting, the AccuBASS™ circuit takes over the bass just as the factory system rolls off. You get smooth, seamless, and rock solid bass response regardless of volume level.

  • MILC™ Source Clip LED

    The MILC™ (Maximum Input Level Control) patent-pending level-setting circuit prevents clipping and damaging distortion. It calculates when the waveform of an incoming audio signal on input 1 and 2 is clipping, and if it is, this LED will fulfill its prime objective and shine forth. With this advanced feature, you are able to optimize the level of the incoming audio signals until the Source Clip LED is just-prior to lighting. If the LED comes on during normal operation, you should adjust the level of the audio signals before they reach the D-4.800.

  • Remote Level Control ACR-3 (Optional)

    The AudioControl ACR-3 dash control is a remote level for your D-4.800 amplifier. It may be mounted under the dash using its own enclosure, or through a custom hole in the dash. The knob should be within reach of the driver, and in a spot where the LED is plainly visible.



Technische Daten


  • Preamp Inputs: 4 balanced
  • Preamp Input Voltage Range: 250 mV – 8 V RMS
  • Speaker Level Inputs: 6


  • Rated Continuous (RMS) Power at 14.4V:
    • 4 Ω – 125W x 4 RMS
    • 2 Ω – 200W x 4 RMS
    • Bridged 4Ω – 400W RMS
  • Preamp Outputs: 2
  • Maximum Preamp Output: 8.5 V RMS


  • Frequency Response: 10 Hz – 30 kHz
  • Signal to Noise: 102 dBa, Ref 200 W @ 2 Ohm
  • THD+N: < 0.1%
  • Minimum Power / Ground Wire Gauge: 3 AWG wire
  • Fuse Rating: 2 x 40 A
  • Crossover: Linkwitz-Riley, Adjustable From 30 Hz – 300 Hz

Weights & Dimensions

  • Dimensions: 22,9 x 20,2 x 5,3 cm
  • Weight: 2,0Kg
  • AudioControl D-4.800
  • Speaker Connectors
  • Fuses
Hersteller AudioControl
EAN 4047442070297


Zu diesem Artikel sind keine Fahrzeug-Kompatibilitäten hinterlegt.


Schreiben Sie Ihre eigene Kundenmeinung:

Nur registrierte Kunden können Bewertungen abgeben. Bitte melden Sie sich an oder registrieren Sie sich

Direkter Kontakt GmbH & Co. KG
Gostritzer Straße 61-63
01217 Dresden

Tel. +49 (0)351 / 871 82 22
Fax +49 (0)351 / 871 82 36

Sie erreichen uns telefonisch:
Mo.-Do.: 9-12 / 13-16 Uhr
Fr.: 9-12 Uhr
* Gilt für Lieferungen nach Deutschland. Lieferzeiten für andere Länder und Informationen zur Berechnung des Liefertermins siehe hier: zur Versandinfoseite.
** Ehemaliger Verkäuferpreis inkl. MwSt. zzgl. Versandkosten